Tut - Spookalicious

Spookalicious

 This tutorial is my own creation and based on my own ideas. Any and all similarities with any other tutorial is purely coincidental.

Please do not upload to or offer this tutorial on any other site without asking me first. Thank you.

Material you will need:

PaintShopPro – I’m using PSP X2, but you should be able to follow the tutorial in any version.

A scrap kit – I used the wonderful kit Spookalicious by Wicked Creationz Scraps, which you can purchase here.

A font of your choice.

A tube of your choice. I use a commission tube by Célinart PinUp.

1 tag template – I used SS-Halloween temp, created by Tasha’s Playground. You can find it here.

Filters/Plugins used: DSB Flux – Spiderweb

Now, let’s get started. It might be helpful if you choose the elements you wish to use beforehand, and open them up in PSP prior to starting the tutorial. That way, you have them handy when following each step.

Also, you don’t have to slavishly follow each positioning nor setting – play and experiment a bit, especially if you use different elements.

If you are unsure how to position an element, refer back to my sample tag.

I do assume you have at least some to moderate experience and understanding of PSP.

The DropShadow throughout the tutorial remains the same: V/H 3/-1 O/B 53/6.05.

Resizing throughout the tutorial is done with “Resize all Layers” NOT checked.

Open template.

Duplicate.

Delete background & credit layers.

Open tube.

Duplicate.

Close original.

On template.

Rectangle1 & 2 – leave as is, or use Manual Color-Correction to change color.

Open pp4 (or choose color/pattern/gradient of choice).

Copy.

Diamond1 layer.

Selections – Float/Defloat.

Paste into Selection.

Selections – Select none.

Delete original diamond1 layer.

Repeat with diamond2.

Circle1 layer.

Pick color from tube.

Selections – Float/Defloat.

Fill with color (or pattern/gradient) of choice.

Selections – Select none.

Delete original circle1 layer.

Duplicate circle1 layer.

On copy.

Plugins – dsb Flux

Spiderweb with following settings:

Rays: 15

Rings: 15

Merge: 25

Blend Mode – Difference.

Dashes layer.

Pick another color from your tube (or use gradient/pattern).

Selections – Float/Defloat.

Fill with color (or pattern/gradient) of choice.

Selections – Select none.

Delete original dashes layer.

Circle2 layer.

Leave as is, or fill with color/pattern/gradient of choice.

If filled, delete original Circle2 layer.

Pixel word art, leave as is, or fill with color/gradient of choice.

If filled, delete original pixel word art layer.

Circle3 layer.

Leave as is, or fill with color/pattern/gradient of choice.

If filled, delete original Circle3 layer.

Copy & paste tube.

Resize & position to liking in circle3.

On circle3 layer.

Selections – Float/Defloat.

Selections – Invert.

On tube layer.

Hit “delete”.

Selections – Select none.

On tube layer.

Layer mode – Luminance.

Opacity 50%.

Circle3 frame layer.

Pick a color/pattern/gradient of choice.

Selections – Float/Defloat.

Fill with color (or pattern/gradient) of choice.

Selections – Select none.

Delete original Circle3 frame layer.

Repeat with Circle4 and Circle 4 frame layers.

Word art – leave as is, or fill with color/gradient/pattern of choice.

Add your main tube and any elements to liking.

Apply Drop shadow as desired.

Then, it is time to add any further text, copyright information and watermark to the graphic.

Feel free to merge all layers visible and then resize to your liking or crop the image.

If you prefer a transparent background, save your tag in PNG format.

Otherwise, if you select the JPG, it will automatically add a white background.

Should you care for a different colored background:

New layer, arrange, send to bottom, and floodfill with your color of choice.

I hope you enjoyed this tutorial!

XOXOXO,

Dani

Tut - Gothic Angel

Gothic Angel

 This tutorial is my own creation and based on my own ideas. Any and all similarities with any other tutorial is purely coincidental.

Please do not upload to or offer this tutorial on any other site without asking me first. Thank you.

Material you will need:

PaintShopPro – I’m using PSP X2, but you should be able to follow the tutorial in any version.

A scrap kit – I used the fabulous kit Gothic Angel by Rebellious Scraps, which you can purchase here.

A font of your choice.

A tube of your choice. I used Vamp Glamour by Keith Garvey, which you can purchase at PSP Tubes Emporium.

1 mask – I used AS_Halloween mask5, which you can find on the Creative Misfits blog here.

Plugins/Filters used – Xero Moonlight

Now, let’s get started. It might be helpful if you choose the elements you wish to use beforehand, and open them up in PSP prior to starting the tutorial. That way, you have them handy when following each step.

Also, you don’t have to slavishly follow each positioning nor setting – play and experiment a bit, especially if you use different elements.

If you are unsure how to position an element, refer back to my sample tag.

I do assume you have at least some to moderate experience and understanding of PSP.

The DropShadow throughout the tutorial remains the same: V/H -2/3 O/B 41/5.75.

Resizing throughout the tutorial is done with “Resize all Layers” NOT checked.

Open new image 600 x 600 px.

Open frame3, c/p, resize 55%.

Open paper11, copy.

Magic Wand, click inside frame, Selections – Expand 3, Paste into Selection, keep selection.

Open your tube, c/p, under frame layer, position to liking.

Selections – Invert, hit “Delete”, Deselect.

Change layer mode to “Hard light”, Merge visible.

Duplicate, Selections – Float/Defloat.

Plugins – Xero – Moonlight – default settings.

Optional: change layer mode and/or opacity if desired.

Open wing 1 and 2, resize both 70%, move underneath frame layer, to the left and right respectively.

Open leaves1, c/p, Free Rotate – Left – 90 degrees, lower edge of frame.

Optional: resize or erase parts of the ends.

Duplicate, flip, re-position if desired.

Open rose, c/p, resize 40%, lower right.

Open cup1, c/p, resize 55%, right side of the frame.

Open bowl, c/p, resize 35%, lower right.

Open crow, c/p, resize 60%, lower right (on top of bowl).

Open your tube, c/p, resize and position to taste.

Apply Dropshadow as desired.

New layer, Arrange – Send to Bottom, Selections – Select all.

Open paper7, copy, on new layer, Paste into selection, Deselect.

Layers – Load/Save Mask – Load Mask from Disk – AS_Halloween mask5, Merge Group.

Optional: resize mask or use your Deformation Tool, if necessary, to tweak your mask layers to your liking and/or lower the opacity.

Then, it is time to add any further text, copyright information and watermark to the graphic.

Feel free to merge all layers visible and then resize to your liking or crop the image.

If you prefer a transparent background, save your tag in PNG format.

Otherwise, if you select the JPG, it will automatically add a white background.

Should you care for a different colored background:

New layer, arrange, send to bottom, and floodfill with your color of choice.

I hope you enjoyed this tutorial!

XOXOXO,

Dani

Tut - It's A Emo Party

It’s A Emo Party

This tutorial is my own creation and based on my own ideas. Any and all similarities with any other tutorial is purely coincidental.

Please do not upload to or offer this tutorial on any other site without asking me first. Thank you.

Material you will need:

PaintShopPro – I’m using PSP X2, but you should be able to follow the tutorial in any version.

A scrap kit – I used the fabulous kit It’s A Emo Party by Crystals Creations , which you can purchase here.

A font of your choice.

A tube of your choice.

No filters required.

Now, let’s get started. It might be helpful if you choose the elements you wish to use beforehand, and open them up in PSP prior to starting the tutorial. That way, you have them handy when following each step.

Also, you don’t have to slavishly follow each positioning nor setting – play and experiment a bit, especially if you use different elements.

If you are unsure how to position an element, refer back to my sample tag.

I do assume you have at least some to moderate experience and understanding of PSP.

The DropShadow throughout the tutorial remains the same: V/H 3/1 O/B 37/5.15.

Resizing throughout the tutorial is done with “Resize all Layers” NOT checked.

Open new image, 600 x 600.

Open partypp13, c/p, resize 55%.

Open paper08, copy.

With Magic Wand, click inside frame, Selections – Expand 2.

New layer, paste into selection, Selections – Select none.

Open tube, c/p, resize and position to liking, under frame layer.

Optional: Copy, mirror, change layer mode and opacity.

Merge visible, duplicate, resize copy 85%.

Open partypp6, c/p, resize 50%.

Selection Tool – Circle – draw a circle of your liking.

Selections – Invert, hit “delete”, Invert – Expand 5.

New layer, underneath paper circle, fill with color of choice, Selections – Select none.

Paper circle layer, merge down once, Arrange – Send to Bottom.

Open partee19, c/p, resize 52%.

Open partee30, c/p, resize 35%, move between two frame layers, to the right.

Open partee40, c/p, resize 40%, move towards lower edge, on top of frame layers.

Open partee15, c/p, resize 25%, lower right bottom.

Open partee17, c/p, resize 30%, upper left corner.

Open tube, c/p, resize and position to liking.

Add any further text, copyright information and watermark to the graphic.

Feel free to merge all layers visible and then resize to your liking or crop the image.

If you prefer a transparent background, save your tag in PNG format.

Otherwise, if you select the JPG, it will automatically add a white background.

Should you care for a different colored background:

New layer, arrange, send to bottom, and floodfill with your color of choice.

I hope you enjoyed this tutorial!

XOXOXO,

Dani